Stories & guides · · 27UsedCar

How to Read a Used Car Inspection Report Before You Buy

What a pre-purchase inspection covers, how to read the photos and video that come with it, which findings deserve a closer look and what to ask before you pay.

How to Read a Used Car Inspection Report Before You Buy

When the car you want is parked in another country, the inspection findings are the closest thing you have to standing next to it. They are only useful if you know what each line means and what it leaves out. At 27UsedCar, your sales manager arranges a professional inspection once your initial payment has been received. Review the report alongside the car’s photos and any video before deciding whether to buy. Once the report is sent to you, we hold the car for you for 24 hours. This guide explains how to read them.

What a pre-purchase inspection covers

A thorough inspection looks at eight areas:

  • body and paint
  • frame and signs of accident, flood or fire damage
  • engine and gearbox
  • electrics and equipment
  • interior
  • tyres and brakes
  • an on-road check
  • documents and identity of the car

Each area answers a different question. The body tells you about past repairs, the frame tells you whether those repairs were serious, and the documents tell you whether the car is the one described.

Body and paint

Inspectors measure paint thickness on every panel with a gauge. Readings are in microns, and the exact figures matter less than how consistent they are. Factory paint gives similar readings across the car. A panel that reads clearly higher than its neighbours, say double, has usually been repainted. Very high readings can mean body filler under the paint.

A repainted panel is not automatically a problem. A scuffed bumper or a door with a car-park dent is often refinished, and that is normal on a used car. What matters is where the work was done and why.

Other things the inspector notes:

  • uneven gaps between panels
  • colour that looks slightly different in daylight
  • paint overspray on rubber seals or trim
  • tool marks on the bolts that hold the bonnet, wings and doors, which show that a panel has been removed

Frame and accident signs

This is the most important part of the report. The structural parts of a car are the chassis rails, the pillars around the doors, the inner wings, the sills, the radiator support and the boot floor. Repairs here matter far more than cosmetic work, because they affect how the car behaves in a crash.

Signs of a serious accident include welds that do not look like factory spot welds, kinked or rippled metal, non-factory sealant and a replaced radiator support. Replaced airbags or seat-belt pretensioners also point to an impact.

Flood damage leaves its own traces: silt under the carpets, rust on the seat rails and under the dashboard, corroded electrical connectors, a musty smell and water marks inside the headlamps. Fire damage shows as melted wiring or heat marks under the bonnet.

Engine and gearbox

The engine should be started from cold, ideally on video. A warm engine can hide starting problems and some noises. The inspector listens for knocks, rattles and timing-chain noise, watches the exhaust and checks that the idle is steady. Persistent blue smoke usually means the engine is burning oil; thick white smoke that does not clear can mean coolant is getting into the engine.

A diagnostic scan reads stored and pending fault codes. Ask whether any codes were cleared recently. Clearing codes just before an inspection can hide a problem for a while, and a scan tool can often show that the system has not finished its self-checks since the codes were cleared.

For the gearbox, the inspector checks for smooth shifts, delays when selecting drive or reverse, slipping under acceleration and, on dual-clutch gearboxes, judder at low speed. Oil and coolant leaks are noted, along with the condition of the fluids.

Electrics and equipment

Everything with a switch should be checked: lights, windows, mirrors, central locking, heating and air conditioning, the infotainment screen, parking cameras and sensors, seat adjustment and the sunroof. Warning lights on the dashboard should come on when the ignition is switched on and go out once the engine runs. A warning light that never comes on at all deserves a question.

Interior

Wear should match the mileage. Look at the steering wheel, gear selector, pedals and the side bolster of the driver's seat. Heavy wear on a car with low recorded mileage is a reason to ask for service records. Stains, damp patches, a sagging headlining and damaged seat belts are also noted.

Tyres and brakes

The report should give tread depth for each tyre and note uneven wear. Wear on the inner edge often points to an alignment problem. Check the tyre age as well: the four-digit code on the sidewall shows the week and year of manufacture, and old tyres can harden and crack even with good tread. Brake discs with a deep lip at the edge are near the end of their life. The spare wheel and jack, if supplied, belong in the report too.

The on-road check

A short drive shows things a static check cannot. Does the car run straight? Does the steering wheel vibrate? Is there knocking from the suspension over bumps? Does the car pull to one side under braking? Does the engine temperature stay steady? The report should also say if the car could only be moved around the yard and not driven on the road. That is not unusual, but you should know.

Documents

The VIN on the car, usually visible at the base of the windscreen, on the door pillar and stamped on the body, must match the registration documents. The documents also show the registration date, which our site uses to show the car's 180-day date. The documents a car needs for export, and the rules of your destination country, are checked separately for each car.

Ask too about the number of previous owners, the service history, how many keys come with the car and whether any loan is registered against it. A registered loan must be released before the car can be sold for export.

How to read photos and video

  • Same car, every time. At least one photo should show the VIN, so you know the pictures belong to this car.
  • Daylight over flash. Flash, night lighting and wet paint hide repairs. Ask for photos in daylight.
  • Reflections. Look along each panel in the photos. Ripples or a wavy reflection suggest bodywork.
  • One continuous take. A cold-start video should run without cuts, from switching on to a steady idle.
  • The underside. Fresh underbody coating in one area can cover a repair. Look for rust, leaks and damage around jacking points.
  • Ask, don't guess. If a photo is unclear, ask for a close-up. It costs nothing.

Red flags

Slow down and ask more questions if you see any of these:

  • high paint readings on the roof or pillars
  • welds or straightening marks on the chassis rails
  • an airbag warning light, or airbags replaced without explanation
  • signs that water reached the seats
  • wear that does not match the recorded mileage
  • a VIN plate that looks disturbed, or a VIN that does not match the documents. In this case, stop.
  • fault codes cleared just before the inspection
  • a video that starts with the engine already running

Questions to ask

  • Which panels have been repainted, and why?
  • Has any structural part been replaced, welded or straightened?
  • Are there stored fault codes? Were any cleared recently?
  • When was the last service, and is there a record?
  • How many keys come with the car?
  • Is there a loan registered against the car?
  • Was the car driven on the road or only in the yard?
  • Can I have a continuous cold-start video?

What an inspection cannot do

An inspection is a careful look at the car on one day. It is visual and functional; nothing is taken apart, so it cannot see inside the engine or gearbox or predict future faults. Expect normal wear for the car’s age and mileage, and raise anything that matters to you with your sales manager before paying the balance.

If your country or bank requires a pre-shipment inspection by a designated organisation, tell your sales manager when you discuss the car so it can be scheduled.

Next step

Shortlist a few cars from the car list and send an inquiry from the car page. Ask your dedicated sales manager for the inspection findings, photos and a cold-start video, and use the questions above to go through them. If you have a question about a car that is not listed, use the contact page.

Editorial review: 27UsedCar ·

A clearer view of the market.

Used cars, shipping updates and buying guides, in your language.

By subscribing, you agree to receive market updates. Unsubscribe any time. Privacy Policy

WhatsApp