Stories & guides · · 27UsedCar

EV Charging Connectors Explained: AC, DC, CCS, CHAdeMO, GB/T and NACS

Why an EV's plug matters as much as its battery: how AC and DC charging differ, and what separates CCS, CHAdeMO, GB/T and NACS — essential reading before buying an imported used EV.

EV Charging Connectors Explained: AC, DC, CCS, CHAdeMO, GB/T and NACS

EV Charging Connectors Explained: AC, DC, CCS, CHAdeMO, GB/T and NACS

Knowledge · 5 min read

Buy an electric car in one region and charge it in another, and the first problem you meet is not range — it is the plug. The world never agreed on a single charging connector, so different markets standardized on different hardware. If you are importing a used EV, or simply trying to understand what a listing means when it says "CCS2" or "GB/T," this guide walks through the main standards, how AC and DC charging differ, and why the connector on the car matters as much as the battery inside it.

AC vs. DC: The Difference That Decides Charging Speed

All EV batteries store direct current (DC). The grid supplies alternating current (AC). Somewhere, that AC has to be converted.

With AC charging, the car does the converting. Electricity flows from a wall box or public post into the car's on-board charger, which converts it to DC for the battery. Because the on-board charger must fit inside the car, its power is limited — commonly somewhere between about 3.7 kW and 22 kW. AC charging is the slow, everyday option: home charging overnight, workplace charging during the day.

With DC fast charging, the conversion happens in the charging station, which is far bigger and more powerful than anything that fits in a car. The station feeds DC straight to the battery, bypassing the on-board charger. Public DC chargers commonly deliver 50 kW to 350 kW or more. That is why the same car might need eight hours on a home wall box but well under an hour on a highway fast charger. The connector's headline power rating is a ceiling, not a promise: the car's battery, its temperature, its state of charge and its own charging curve all decide how much power it actually accepts.

The Main Connector Families

Type 1 (SAE J1772) and Type 2 (IEC 62196). These are the two classic AC connectors. Type 1 is a single-phase plug long used in North America and Japan. Type 2, often called Mennekes, is the European standard and supports three-phase power, which is how European home and public AC charging reaches higher speeds.

CCS (Combined Charging System). CCS takes the familiar AC connector and adds two large DC pins below it, so one vehicle inlet handles both slow AC and fast DC charging. Built on the Type 1 plug it is called CCS1 (North America); built on Type 2 it is CCS2 (Europe and many other markets). Promoted by the CharIN association, CCS became the default fast-charging standard across Europe and much of the world, with high-power chargers rated at 350 kW and beyond.

CHAdeMO. Developed in Japan, CHAdeMO was one of the first DC fast-charging standards and is still found on Japanese-market cars such as earlier Nissan Leaf models. It uses a separate, dedicated DC inlet, and it was an early supporter of bidirectional charging — feeding power back from the car. Outside Japan its network has been shrinking as CCS and NACS expand, but a used Japanese import may still depend on it.

GB/T. China uses its own national standards, known as GB/T, with separate connectors for AC and DC charging. They look superficially similar to other plugs but are not interchangeable with any of them. Because China is the world's largest EV market, GB/T is among the most widely deployed connector families anywhere — and every EV built for the Chinese domestic market uses it. A next-generation design developed with the CHAdeMO side, known as ChaoJi, aims at much higher power and better cross-standard compatibility.

NACS (SAE J3400). The North American Charging Standard began as Tesla's own connector. Tesla opened the design to the industry in late 2022, other automakers adopted it in waves, and SAE International standardized it as J3400, publishing the J3400/2 connector specification in May 2025. NACS is compact and uses the same two power pins for both AC and DC charging. New vehicles from most brands selling in North America are moving to native NACS ports, while CCS1 cars increasingly rely on adapters.

Why This Matters When You Buy a Used EV Across Borders

A car's connector is fixed at the factory for its home market. A Chinese-market EV has GB/T inlets; a European one has Type 2 and CCS2; a North American one has J1772/CCS1 or, increasingly, NACS. Move the car to a different region and the local public chargers may simply not fit. Adapters exist for some combinations, but they are not universal: an adapter rated for AC charging cannot be used for DC fast charging, and some combinations have no safe adapter at all. Before buying an imported used EV, check three things: the connector type on the car, the connector types your local charging networks actually offer, and whether the car's charging speed on your local standard still meets your needs. The plug is a small piece of metal and plastic — but it decides where, and how fast, the car can charge for the rest of its life.

Sources

Sources

Editorial review: 27UsedCar ·

A clearer view of the market.

Used cars, shipping updates and buying guides, in your language.

By subscribing, you agree to receive market updates. Unsubscribe any time. Privacy Policy

WhatsApp